Bathtub faucet leaking and how to repair it

why is my bathtub faucet still leaking

The annoying and costly non-stop drip from a bathtub faucet is usually triggered by the failure of small washers. You don’t need a plumbing technician to take care of the issue.

Why is your bathtub faucet leaking?

The faucet deal with connects to a stem and when you turn the manage it moves the stem. Small washers are connected to the end of the stem with screws.

Turning the faucet handle to the “off” position causes the washers to put pressure against the faucet seat and stop the circulation of water. When turning the faucet manages no more completely shuts down the water flow, the seat washers and seats most likely require replacing. Always change both seat washers and seats on a double-handle faucet.

Steps required to repair bathtub faucet

  1. Shut off the bathtub faucet water supply if you can access the shut-off valves for the tub. If you can not access the shut-off valves, turn off the primary water supply where it comes into your home or shut the water off at the meter.
  2. Utilize a small, flat blade screwdriver to pry the handle buttons from the faucet deals with and expose the handle screws. Utilize a Phillips screwdriver to remove the screws from the deals with and pull the deals with off the faucet to expose the stems.
  3. Move a shower stem socket over each faucet stem. Turn the socket counterclockwise. If the stems appear frozen, remove the socket and use permeating spray lube to the stem threads. Offer the lube 15 to 20 minutes to work. Slide the socket back over the stems and turn the socket counterclockwise to eliminate them.
  4. Insert a seat wrench into the openings left by the stems. Turn the wrench counterclockwise to remove the old seats. Apply liquid thread sealant to the threads on the brand-new seats. Install the brand-new seats into the faucet openings and tighten clockwise with the seat wrench to secure them.
  5. Eliminate the seat washer screws from completion of the stems with a Phillips screwdriver. Pry the old seat washers from the ends of the stems. Install new seat washers onto the ends of the stems and protect them with brand-new seat washer screws.
  6. Cover the threads of the stems with liquid thread sealant. Insert the stems into the faucet openings. Utilize the shower stem socket to turn the stems clockwise and tighten them.
  7. Cover the stems with the faucet deals with. Protect the faucet manages with the manage screws. Snap the handle buttons back on top of the faucet handles to cover the screws. Turn the water supply to the bathtub faucet back on.

Things You Will Need to Stop Faucet Leaking

  • Small, flat-blade screwdriver
  • Phillips screwdriver
  • Shower stem socket
  • Permeating spray lubricant
  • Seat wrench
  • Faucet seats
  • Liquid thread sealant
  • Seat washers
  • Seat washer screws

Updated: March 2, 2016 — 8:42 am
HOME INTERIOR DESIGN © 2016 Frontier Theme